Graphics card loud fan no display

Thank you for supporting the work I put into this site! GPU fan not spinning is one of the most serious problems faced by some of the graphics card users. A GPU fan is used to cool down the heatsink of the graphics card and prevents it from overheating.

Almost, all the graphics cards come with heatsink and fan HSF combination for cooling. However, there are some passively cooled graphics cards too that come only with heatsink without fan for their cooling, but they are very few in number, and most of them are entry-level or budget graphics cards that can sustain on passive cooling, because of their less heat generation.

These cards are not for high-end gaming and are basically used in HTPC or for building a silent PC for work, and for light gaming. Moreover, some high-end graphics cards come with waterblock for custom liquid cooling and the hybrid ones employ an AIO cooler in combination with a blower type fan.

A fan is an active cooling component of a graphics card and if it is not spinning at all or not spinning properly, then it is a serious issue that should be resolved as quickly as possible. In some of the serious cases, overheating may result in damage to some of the graphics card components. There can be several reasons or causes that may result in a graphics card fan not to spin. Some of them are related to hardware or software fault, and some of them can be due to some misunderstanding by the users.

So, here I am going to list down list almost every possible cause for GPU fans not spinning problems along with their solutions.

In most of the cases, the GPU works when fan not spinning, but you can face some issues where both fan and GPU are not working, or when fans are working but GPU is not working.

Without getting into any panic mode, first, you have to check that whether the fans of your graphics card are not spinning at all or they are spinning when playing a game or during a GPU intensive workload. This is because some graphics cards come with semi-passive cooling mode, where the fans stop spinning during idle or in low load conditions unless certain temperature threshold limit is reached, and they start automatically when the load on the GPU increases or the factory specified temperature threshold limit is crossed.

So, in this case, there is nothing to worry about as it is a built-in feature of the card, which is incorporated to provide cool and quiet operation. However, if the fan is not spinning under high GPU load or when running heavy games then it is something to be worried about, and have to identify the real cause of it.

Note: In semi-passive cooling mode, the fan may spin during powering on the PC and then stops during idle or low workload situations.

GPU fans @ 100% and no screen signal

In some graphics cards, you can also disable the semi-passive cooling mode and switch to active fan cooling mode via bundled graphics card software or utility for fans to spin all the time.

If the fan does not start during playing a heavy game or high GPU load then you can have a faulty fan or another issue. You can also test the fan operation by running GPU benchmarking softwaressuch as the Heaven benchmark. A bad or faulty driver is also a possibility that can cause your graphics card fan to stop spinning or make it behave in a strange way. So, if you are facing this problem just after installing a newer driver or another version of the driver then you must roll back to the older driver.

I have said multiple times in this blog that the latest drivers are not always best for all graphics cards, and you should always test and play around with different versions of graphics drivers to see which one performs the best for your card. Also, before installing any newer or even older driver, you must completely remove the currently installed driver using the DDU or Display Driver Uninstallerwhich is the best utility to remove each and every trace of the installed graphics driver, whether it is an Nvidia or AMD video driver.My Account.

Remember Me? Need an account? Register Now. Recent Blue Posts 6 hours ago. Recent Forum Posts AM. Thread: Graphics Card Fan spinning very fast but no display. Graphics Card Fan spinning very fast but no display I've made a few posts here so sorry if you're sick of me, apparently i'm destined for pc problems.

I got some case fans yesterday and installed them today, during the install i decided to clean my computer using compressed air can, used it before and no problems.

This has happened before but it usually goes back to normal after 1 or 2 resets of power but this time no matter what the fan goes very loud but no display. I removed all the extra fans incase that was a issue, reseated the graphics card but still no luck. The PC was working fine yesterday and the only difference is i cleaned out some dust and re-assembled.

Right now i'm using the onboard graphics to post this, i'm mainly trying to figure out if its a PSU or Graphics Card problem. Last edited by mmocb2cbbaf; at PM. Reply With Quote. Post a proper set of pictures of your system internals. Make sure we have a good overview of the connectors everywhere like 24pin, 8pin, gfx etc. Barring that your issues can literally be anything.

Try removing and re-seating the RAM f. What GFX are we talking about, the old one? Originally Posted by Evildeffy. Last edited by mmocb2cbbaf; at AM. A quick google search suggest that yes, you've likely lost a pin. Check the old video card and see if the pin got stuck in the old card. You can get an adapter to use as a workaround instead of replacing the whole power supply.

That shouldn't be an issue in general. Your PSU current should be plenty to power it all. So even at worst case scenario you still don't reach the max of W power delivery on the 12V system.

That isn't to say the PSU might have degraded way faster than it should've. Do you know anyone you could borrow their GFX card from preferably about the same performance class? Preferably with an 8 and 6 pin connector on it because if it boots with that your GFX is fucked. And if the issues are the same you also have your answer. Originally Posted by Hamhead PCpartpicker says i should be around W not including case fans etc but yeah unfortunately i'm surrounded by people even less tech-savvy than me and they don't care much for computers so i won't have much luck there, maybe i should take it to a repair shop for comparison.Tech Guided is supported by its readers.

If you purchase products after clicking on links on our site, we may earn an affiliate commission. Learn more. However, in the majority of cases, the reality is that it is probably a simple mistake that the builder missed and the solution is simple. They come with a passive cooling mode that is designed to help them cut down on system noise. You can also install MSI Afterburner and raise the speed of the fan s manually.

Some first-time builders forget to plug things in. It happens. Check to see that your graphics card is connected to your power supply. If you have access to a known working power supplyinstall that one and recheck if your graphics card and its fans turn on.

If it turns on, the original PSU may be faulty. From there, you can try installing the graphics card in a different PCIe lane and seeing if the PCIe lane on your motherboard is bad. If you have access to another computer that is known to be workinginstall the new graphics card inside of it to test and see if it turns on. If it turns on properly in the test computer, then it is likely that the motherboard in the original system is bad.

Remove the graphics card from the build entirely and see if your system boots up without it. You can use a can of compressed air to remove any dust that has collected on the fans. If you have an aging graphics card and the fans are no longer spinning, then you may be able to squeeze some extra life out of them by re-oiling the bearings on the fans. If the oil gets your fans spinning again, then great.

Hit the button below to subscribe! Your email address will not be published. This site uses Akismet to reduce spam.

graphics card loud fan no display

Learn how your comment data is processed. I have a Gt I bought it about 3 months ago. About a few weeks from now. Its fan started making alot of noise even though the computer was just on and nothing was running.

Switch it off had some dust. Tried blowing off as much as possible. Then when I plugged it back in. The fan just stopped spinning totally. Pc does work just that when you try run demanding programs the gpu heats up.Join us now!

Forgot Your Password? Forgot your Username? Haven't received registration validation E-mail? User Control Panel Log out. Forums Posts Latest Posts.

View More. Recent Blog Posts. Recent Photos. View More Photo Galleries. Unread PMs. Essentials Only Full Version. Dark Corner. New Member. Hi, I have a GTX FTW and I installed it 5 days ago and today I got black screen and very noisy fans it happened when I was playing Dark Souls 3 for about 2 hours and in the middle of a boss fight I got the black screen and now whenever I launch a game, lets say for example The Witcher 3, five minutes later my screen goes black and my GPU fans gets noisy and I have to restart my PC.

Here's my spec CPU : i7 3. Cooler : Xigmatek Dark Knight. OS : Windows 10 Home 64 bit. I'm really worried about my GPU I hope its not damaged. I also got my problems in games, Dying Light and Mirrors Edge.

Also my GPU temp has never gone above 72c till today when all of this start happening. Sorry for my English and thanks for reading. How old is your psu? Have you tried a different set of pci-e power cables to power the card? Have you tried reseating the video card?

graphics card loud fan no display

Sajin How old is your psu? Hi Sajin, my PSU is one and half years old, also I did what you wrote, and I did everything you wrote in your guide you replied with and I still getting the same problem, my screen goes black, game is running and I still hear the sounds of the enemies and other players, GPU gets very loud and I was looking at my GPU temp and max temp.

This issue has been confirmed by EVGA to be a hardware defect, at least for cards. Dark Corner Sajin How old is your psu? Does the card black screen occur when running unigine heaven 4.I have a HP Z desktop and have the following problem: When I startup the desktop, the fan makes a lot of noise and the desktop doesn't start up black screen, no messages on the screen, not even the bios. All of those switches with fans whine a bit.

In retaliative terms, they are usually not as loud as a rack mount server. Team Genius is an IT service provider.

Should can test if the monitor is working by bringing up it's independent settings on screen using the monitor buttons check it is on the correct output if it has more than one connection VGA, DVI, HDMI, etc. Graphics card wise try removing the installed card and using another or on board card if it has one. It could be anything, but I would agree with above, it can be anything from the power supply to the board, but either way the computer has become an anchor.

We have a power supply tester here, and it was cheap. It wouldn't be a bad idea to test the power supply and then if that's not the problem I would start checking each component one at a time. Statistically it would be the board but I would still check everything else too. If they show no activity, then you know that the machine is failing to POST. Also check the capacitors on the board to see if they have started to burst.

You can tell this pretty easily just by looking at them. If the tops of the capacitors are starting to swell or if there is any material coming out of them, then obviously they have failed. Also find a way to test the power supply as previously suggested.

I had a similar issue, and it ended up being a dead motherboard. If you start the desktop and it makes a beeping noise, try to figure out where it is coming from. If it doesn't beep, chances are that it is either the motherboard or the power supply. First make sure the monitor is plugged in and turned on, just to be sure If so, then make sure the video connection cable is correctly plugged into both the monitor and graphics adapter.

If you have another monitor, test with that. If the computer has a graphics card and a separate on-board graphics adapter, try that. If you are still getting nothing no beep or blink codes? Then you can try swapping the power supply with a known good one. Any chance it's under warranty? I've seen plenty of bad power and surges coming to computers fritz them out. Most newer motherboards will have LED indicators and if they aren't all on, it's a sign that the board's gone.

Good luck. Try disconnecting everything down to the basics. If there's beep codes you should be able to diagnose the failing component. PSU is easy to replace. The motherboard is obviously more of a pain.

How to silence a loud video card fan

Bulging capacitors is the kiss of death for most motherboards so definitely something to look for. Which specific fan is making a noise?? I would check for burst or bulging capacitors if they are there then regardless the Motherboard is bad. If it is a case fan, most likely just it being bad and most of the time there is no problems cause by this being bad other than poor circulation.

If it is coming from the Graphics card then again look for bulging capacitors on the card, if you pull the card out and spin the fan with your finger does it spin with ease? Does the motherboard have on board graphics, if you take the graphics card out, assuming you have one, plug your monitor into the on board and turn it on. Any results?Thank you for supporting the work I put into this site!

Graphics Card not detected or GPU not detected is a common problem that is faced by many users around the world. It is a very annoying problem in which your graphics card is not detected during the booting process or your GPU is not detected or recognized in windows.

How to Fix “No Display” or “No Signal” Desktop Computer’s Problem?

This problem can arise when you install a new graphics card to your PC or even in the middle of using the currently installed graphics card. This problem can be fixed easily if you know the right cause but it can also get very frustrating sometimes. So here in this post, I am going to provide the various solutions to fix the graphics card not detected problem for your PC.

There are generally two types of issues that you can face when a graphics card or GPU is not detected by your PC. There will be no video signal on your monitor and a blank or black screen will be displayed.

Computer Turns On But No Display On Monitor - Led Light On Fan Spinning - Power Supply Unit Pc?

This error may or may not be accompanied by beep codes depending on your computer BIOS or motherboard. You may also not be able to install graphics drivers and move to higher resolution and refresh rates during this issue. Here are the various software and hardware solutions that you can try to fix the graphics card not detected an error for both Nvidia and AMD graphics cards.

The first and foremost thing to do is to check your graphics card installation. To make sure that the graphics card is properly installed in the graphics card slot, remove the graphics card and put it back again in the PCI-Express x16 slot carefully. After that power on your computer to see if the problem is fixed or not and If it is not then go to the next step mentioned below.

If you are installing graphics card for the first time and then you may to disable the onboard video and set the primary graphics or video to PEG PCI-Express Graphics. Different BIOS have different names here but the process is the same for disabling onboard graphics and set primary graphics to the graphics card. This is the most important factor to keep in mind when you face a graphics card not detected a problem.

If your PSU is under-powered for your new graphics card then it will not be able to provide sufficient power to the graphics card and thus your graphics card may not be detected by your PC or in windows.

Also if your graphics card requires 6-pin or 8-pin PCI-E power connectors then make sure to connect them with your PSU so as to provide sufficient power to your graphics card for its working. You can check out the list of best budget PSUs for graphics card from the link given below. After removing the video drivers for onboard graphics, you can install the video drivers for your dedicated graphics card. You must install proper video card drivers for your graphics card so that it can function properly.

Always download drivers from the official websites of the graphics card or GPU manufacturer. Widows updates can often lead to this problem where the graphics card is not recognized in Windows. If your graphics card is not being detected after a recent windows update, then remove or uninstall that windows update and roll back to previous one. I have seen this issue mostly with Windows 10 that has a knack of getting and installing so many updates in a short period of time.

Check the display cable of the graphics card and see if it is working properly or not. This is because many times a faulty and cheap video cable can cause this graphics card not detected problem. Here I would advise you to buy a good branded cable having gold connectors at the end-points. It can happen that the graphics card is not compatible with your older motherboard. Here you can try to update your BIOS so that it can support your new graphics card.

Nvidia or AMD and increase the resolution. If your graphics card is defective or has gone bad then this problem is bound to arise.

Here you can check your graphics card in another PC and see if it working properly or not. If it is not working in other PCs then you can either get it repaired or exchange it if it is still under warranty period. It is very rare but it could happen that the motherboard PCI-E x16 slot is not working properly or it has gone bad. You can check your graphics card in another computer and if it is working there then there is definitely something wrong with your motherboard or the motherboard is not supporting your graphics card.

Here the only thing you can do is to replace your motherboard to a newer one.Join us now! Forgot Your Password? Forgot your Username? Haven't received registration validation E-mail? User Control Panel Log out.

graphics card loud fan no display

Forums Posts Latest Posts. View More. Recent Blog Posts. Recent Photos. View More Photo Galleries. Unread PMs. Essentials Only Full Version. New Member. Ive got a bit of an issue. Just went to turn my PC on has been working fine for months and today when i turned it on, the GPU ti fan went up to max speed but no image appeared on the screen.

I've tried re-seating the GPU, checked all plugs are firmly in place and currently the only way to get a signal through to the screen is to remove the GPU completely and run from the mobo directly. I havent changed any drivers or updated bios recently so im not sure what could be causing the issue.

Ive tried googling and have seen people suggesting power supplies are insufficient but most of the people with that issue are atleast getting a signal before crashing. It seems that everything boots correctly and goes into windows but i cant be sure because i have no monitor signal.

Ive had this set up for a year now with no change so im assuming something has gone belly up weather its a psu or gpu? My PSU is a coolermaster Watt silent pro. Currently i have taken the GPU out of the system for fear or any damage and the noise is insanely loud. Omnipotent Enthusiast. Are you sure everything is right with PCI-E cables?

Can you tried others. Can be PSU and Graphic card.


This entry was posted in Graphics card loud fan no display. Bookmark the permalink.

Responses to Graphics card loud fan no display

Leave a Reply

Your email address will not be published. Required fields are marked *